Control dust at source with BIOnoDUST
An organic dust suppressant for quarries, mines, haul roads and working faces, developed to improve operational control.
- Technical site assessment
- Recommendation tailored to the operation
- Biodegradable product
- Simple, effective application
What BIOnoDUST solves
Reduces dust at source and improves operational performance on surfaces exposed to traffic, wind and dry conditions.
BIOnoDUST is the solution for eliminating dust in quarries, construction sites and any operation where dust compromises safety and maintenance. Acting on the surface layer, this suppressant promotes cohesion of the fines and stabilises the surface, preventing particles from becoming airborne through wind or heavy traffic.
Problems it solves:
- Excessive dust on roads and access routes
- Fines lifted by vehicle movement
- Loss of visibility in operational areas
- Particle drift into adjacent areas
- Reliance on water spraying alone, often insufficient and short-lived
Less dust means more operational control.
With BIOnoDUST, you reduce surface mobilisation of fines and improve working conditions, traffic flow and environmental management on site.
Cut the dust.
Improve your operation.
Dust control is not only an environmental matter — it is a matter of operational efficiency, safety and the reputation of your site.
Every site is different. The solution has to be tailored.
Send us the details of your case and receive a technical proposal matched to the real conditions of the ground and the operation.
What we need to know to answer accurately:
- site type: quarry, mine, construction site, internal road or other
- approximate area to be treated
- traffic frequency and intensity
- surface type and fines content
- target outcome and expected duration of the effect
How to buy
Buying BIOnoDUST is straightforward, with technical support to match the solution to real operating conditions.
BEFORE
AFTER
An End to Dust on Your Site
Improve operational control and reduce dust resuspension on roads, access routes and working areas with BIOnoDUST.
Ideal for:
- quarries and mines
- construction sites and site access roads
- service tracks and internal roads
- industrial areas with frequent traffic
Request a proposal tailored to your case.
BIOnoDUST Consumption Calculator
Estimate water and BIOnoDUST consumption for application on access roads, platforms, material yards, industrial areas, quarries, worksites and unpaved surfaces subject to dust emission.
Estimated result
| Type | Application | Dosage | Consumption / 1000 m² | 25 kg bags | 10 kg bags |
|---|---|---|---|---|---|
| Light | 1.5 L/m² | 2,5% | 37.5 kg | 2 | 4 |
| Medium | 2.0 L/m² | 3,0% | 60.0 kg | 3 | 6 |
| Reinforced | 2.5 L/m² | 3,5% | 87.5 kg | 4 | 9 |
How to use BIOnoDUST
FAQs
BIOnoDUST is a biodegradable dust suppressant for professional application on roads, access ways and operational areas subject to traffic and wind.
After application and drying, it promotes the surface cohesion of the fine fraction, reducing the mobilisation and resuspension of dust.
It can be applied on: quarries; mines; worksites; service roads; internal roads; industrial areas with frequent traffic.
It is prepared as an aqueous slurry and applied by uniform spraying, with suitable equipment such as a tanker truck or sprinkler system.
The recommended concentration is 2.5% to 3.5% in water, with the application adjusted to the actual site conditions.
No. BIOnoDUST is not classified as a hazardous product under the normal conditions of use foreseen.
The product's development was based on operational performance and environmental criteria, valuing biodegradability in accordance with the technical and scientific evidence reported in the specialised literature.
It depends on the context. In many cases, it substantially improves dust control compared with simple watering, but performance depends on factors such as traffic, humidity, grain size, wind and rainfall.
Not equally. Performance depends on the surface characteristics, namely fines content, humidity, compaction, grain size and operating conditions.
It is not the ideal condition. On saturated, muddy surfaces or those with significant runoff, effectiveness may be reduced by wash-off and lack of surface stabilisation.
It depends on traffic intensity, climate and the behaviour of the treated material. Field assessment is recommended and, when necessary, a trial on a pilot section.
Send us information about: type of site, area to treat, surface type, traffic and intended objective so we can technically frame the solution.
Have a specific question? We'll review your case and help define the best application approach.
Request a proposal
Fill in the form and receive a technical proposal matched to your case.
Cut the dust on your site
Dust control is not only an environmental matter — it is a matter of operational efficiency, safety and the reputation of your site.
BIOnoDUST helps reduce the resuspension of fines and improves traffic flow, visibility and control on roads and working areas.
Send us the details of your case and receive a technical proposal matched to the real conditions of the ground and the operation.
Rua Santo André, n. 1260 CC Parque da Cidade, Lj. K, 2 Piso
4560-221 PENAFIEL
Contact
+351 924267640
geral@geotek.pt