Dust levels on unpaved rural and forest roads can vary from one section to the next. A timber haul route, a farm access track and a stretch near homes may carry very different traffic. Start by noting where visible dust is raised and when those stretches are busiest.

Identify the sections that need assessment
Walk the road with its owner or manager. Mark bends, passing places and stretches with loose fine material. Record traffic types and frequency, including seasonal farm and forestry movements. Note where dust from passing vehicles reaches buildings, work areas or junctions used by other road users.
Check gradients and runoff routes
Look for roadside ditches, culverts, slopes and neighbouring watercourses. Deal with active erosion, deep ruts or standing water before considering an application. Mark the part of the running surface you intend to assess and keep vegetated verges, ditches and drainage features outside that area.
Plan a trial around normal use
Confirm who manages the road and which access windows have to be kept open. If there is a suitable location to trial BIOnoDUST, choose a section representative of the usual surface and vehicle loads. Record moisture, weather and traffic, then check the same points when the section is back in use.
Send the details needed for an assessment
Provide the road length and average width or approximate area, along with photographs of the surface and drainage. Describe the vehicles using it, when dust is most visible and where water crosses or runs alongside the road. These details help the technical team assess the proposed trial.